Free shipping on orders over $200


Munster Snowmobile Suits: A Complete Guide

Posted by Power Funnels Marketing Team on

Every time you go for a ride, be sure you are wearing an appropriate snowmobile suit. You must wear proper riding attire to guarantee your snowmobile adventure is safe and fun. To prepare for changing weather, make sure you dress in layers.

The most important rule is to avoid wearing cotton in all layers of clothing since it can get wet, freeze, and does not wick moisture from the body. Underlayers, eye protection, headgear, boots, and outer layers are all essential components of a proper snowmobile suit.

Getting ready for a snowmobile trip

Winter sports like snowmobiling place a lot of demands on the rider. Snowmobile riders should be familiar with Munster snowmobile suits so they can easily navigate various challenging scenarios.

Under Layers

A few light layers give more protection than one hefty layer, which is why snowmobile suits have numerous layers. A polyester or synthetic blend should make up the top layer.

On chilly days, layers can be a reliable defence against the cold and wind chill. You can take off some layers if you're wearing too many while traveling, but you can't put on more layers if you need to before you go.

Cotton does not wick sweat-induced moisture away from your body, so it should never be worn as a layer. It is advised to use silk, polyester blends, and other synthetic blends because they dry rapidly and improve riding.

Snowmobile Accessories

Snowmobile suits' outer components are made up of several materials. You will encounter obstacles on trails in various circumstances; therefore, you must be prepared for potential issues and difficulties. The essential exterior clothing for each snowmobile trip is listed below.

Head Gears for Snowmobiles

A snowmobiler should wear these three types of headwear at all times.

Winter Face Masks

On cold winter days, facemasks are crucial to avoid frostbite. If you need to wear your helmet fully-faced, a face mask is necessary. Facemasks constructed of lightweight, thin synthetic textiles like polyester, silk, or other materials are less clunky and more comfortable.

Eye Protection for Snowmobiling

You must have goggles, helmet visors, and sunglasses for eye protection. These things will help to protect your eyes from tree limbs, snow, and ice kicked up from other snowmobiles.

Best Snowmobile Helmets

An approved helmet is critical; snowmobilers commonly use three basic types.

  • Full face helmets
  • Open face helmets
  • Modular helmets 

The Best Boots, Socks, And Gloves For Snowmobiles

The most excellent snowmobile equipment must provide the ideal level of impact protection, be cozy enough to wear all day, and have helpful features that set it apart from the competition.

Best Gloves for Snowmobiles

Even 95% of snowmobilers prefer to wear gloves. They do so for various reasons, but the biggest one—aside from fashion—is to keep their hands warm while riding. To keep your hands warm, your gloves should be waterproof and windproof. Always ensure that your gloves allow your hands to operate the snowmobile's controls fast and efficiently by wearing fleece or wool glove liners under your regular gloves. Carrying a spare pair of dry socks is a wise habit for quick changes.

Snowmobiling socks

Since they help wick moisture away your skin, non-cotton socks are best for maintaining a warm insulating layer on your feet. Always keep a spare pair of socks on hand so you may switch them out if your feet become cold and wet. The ideal socks to wear in cold weather are lightweight nylon, polypropylene, fleece, wool, silk, or synthetic blends.

Snowmobile boots

The best snowmobile boots have waterproof rubber bottoms high enough to repel snow. Choose a breathable liner that wicks sweat away from the foot made of wool, fleece, or a synthetic substance.

You should get the best and most exceptional boots that provide support and are comfortable for a long day of riding. They should not be tight or ill-fitting, and they should be relaxed.

A Snowmobile Outfit

Suits made specifically for snowmobiles are warm and comfortable to wear while riding. Typically, they include a jacket worn over insulated bibs or pants. The primary purpose of the Munster snowmobile suits is to shield you from the cold, wind chill, and frostbite. Your snowmobile suit should have a wind- and water-resistant outer shell.


When participating in this sport, there are many factors to consider; wearing the best snowmobile suits is essential because it protects both the inside and outside of your body. 

Read more →

Ski Doo Snowmobile Riding Gear – How to Purchase

Posted by Power Funnels Marketing Team on

Have you been featuring some time off in the mountains? How would you like to go snowmobiling? First and foremost, you need to know what type of apparel to bring along with you. 

You also need to know what safety precautions to take and how to drive the Ski Doo snowmobile. It would be perfect if you did your exploration so that when you got out on the pitches. 

The correct Ski Doo snowmobile riding gear should cover you against all feathers of conditions because, in the sport, one can anticipate icy and warm rainfall conditions. It should also have enough inflexibility to make you feel comfortable while enjoying the lift. 

 Snowmobile Gear Guide - How to Stay Safe on the Ice

Before you lead out on the ice, you must ensure that the performance sled is the best choice for your lift and is ready for high time. 

Snowmobiles are a great way to navigate ice roads, firm lakes, and snowy terrain. Unfortunately, they can also be dangerous if you do not take the proper precautions.

The best way to go snowmobiling is with musketeers and family members. This can be a precious and time-consuming way to go, though. However, also the answer is simple; rent a snowmobile if you are looking for a cheaper and quicker way to take your Munster Ski Doo snowmobile out on the ice. 

Renting a Ski Doo snowmobile will allow you to enjoy the same riding experience but with smaller costs and further inflexibility. Renting a snowmobile also means you will not have to deal with conservation or storehouse issues at home since the rental company will keep the sleds. 

 The Best Women's Snowmobile Suits

When it comes to snowmobiling, the right outfit is critical. To ensure you are defended from the rudiments, head to your original sporting goods and ask for a women's Ski Doo snowmobile suit.

The women's Ski Doo snowmobile suits you choose will differ depending on the rainfall and terrain of where you live. However, if you are planning to ride in deep grease paint, you will want to go with a heavy-duty suit that offers maximum protection, if you live in a position that gets a lot of snowfall.

With the proper apparel, you can comfortably enjoy a day of snowmobiling. Still, suitable clothing is essential to your comfort and safety. 

The first step is to elect the applicable Ski Doo snowmobile suit for your requirements. Heavy-duty/ leak-proof pants will keep you warm and dry. The one-point suit is less precious and will protect short passages. When choosing a jacket, look for a heavy-duty leak-proof/ permeable fabric. 

 Excellent Snowmobile Clothing 

While most people who ride snowmobiles wear defensive apparel, others do not know what to wear or stay warm or safe. To subsidise this, we recommend dealing with ingrained apparel at your store to keep riders warm, allow for movement, and cover them from injuries. 

Suitable Ski Doo snowmobile apparel will include a jacket, pants, warmer gloves, socks, and other accessories. 

 How to Choose the Excellent Gear for Snowmobiling

You can only go snowmobiling with many essential particulars. First and foremost, you need to buy or rent a Ski Doo snowmobile that fits your requirements, is within your budget, and provides your skill position.

Another important gear choice is a set of Ski Doo snowmobile-specific thrills. While you can use regular delights, they will probably not give the protection you need when riding on ice. Eventually, flashback goggles and gloves. The rainfall can snappily turn from sunny to snowy and windy. 

Still, it's essential to determine how to plan to use it if you're considering buying a new Ski Doo snowmobile. However, a performance sled will be your choice if you plan to ride through deep snow in an area with no trails.

Still, a recreational sled will give you better performance and smoother running if you want to ride with musketeers and family or enjoy the decor. The Ski Doo snowmobile's performance is determined by its machine size, weight, and track length.

 Snowmobile Apparel to Suit Your Requirements

When choosing the best Ski Doo snowmobile appeal to suit your requirements, there are several effects to consider. First, you should look at the type of exertion you'll be doing.

A simple ski jacket and pants can serve if you go on a short trip. Still, if you plan on riding regularly in the downtime, invest in a more precious Munster snowmobile suit with better figure quality that is more leak-proof and will last longer.

 Then are some critical Ski Doo snowmobile vesture particulars to ensure you have.

  •    Snow thrills
  •    Snow jacket
  •    Helmet Snow
  •    Snow gloves or mittens
  •    Snow fabrics

Snowmobiling is one of the most notorious downtime sports, with hundreds of thousands of people hitting the trails yearly. When you are out on the trails, there are specific effects you have to wear to stay safe and comfortable. Munster Canada is then to guide and give you all these essential Ski Doo snowmobile accessories and vestures.

Read more →

A Complete Guide On Munster Snowmobile Products

Posted by Power Funnels Marketing Team on

Before you even think of firing up a snowmobile, you must be familiar with the Munster snowmobile products. A snowmobile is like a car. It has a bunch of specific terms to describe its various parts. Knowing the names and functions of these parts is essential before you hop aboard. The good news is that you've come to the right place.

Do you know your Munster snowmobile in and out? Use this ultimate guide to Munster snowmobile parts to learn every last bit of your machine.

Understand The Snowmobile:

Many people have never driven a snowmobile before. After all, they're not exactly fit for just any weather conditions. When you do get the chance to take a snowmobile for a spin, you must understand how the vehicle operates. When you know the various Munster snowmobile products, you'll be part of the snowmobile community.

More importantly, you'll be equipped to recognize and deal with mechanical problems. You'll know the correct terminology when explaining the fault to someone.

Snowmobiles are specialized machines, so it's a good idea to do your reading. As a first-time snowmobile user, it's essential to check out some diagrams and familiarize yourself with the various Munster snowmobile products. It'll make your ride a whole lot smoother and more enjoyable. A little research will quickly reward you with a great deal of knowledge and peace of mind. 

Perfect Machines for Ice: 

It's widely agreed that snowmobiles are a modern invention that changed how we relate to snowy conditions. Before they were around, traversing through the snow and ice was trickier.

Unsurprisingly, it took a few decades to develop the perfect machine for swishing over ice with ease. Engineers battled long and hard to get the snowmobile to where it is today.

Snowmobiles Versus Motorcycles:

To understand how a snowmobile is engineered and why it's made this way, it's helpful to compare it to a regular motorcycle. In an ordinary bike, you have a heavy engine in the center with the rider balanced on top of it. And then you have two narrow wheels with rubber tires on either side.

Theoretically, you can ride a machine like this through the snow. However, the ice would have to be soft enough to compact as you go over it. The critical thing to understand is that, in practice, motorcycling on ice and snow is extremely dangerous.

It's best to avoid doing this, as the steering is tricky, and there's a high chance that your bike will slide around and may tip over ultimately. The main issue is that only a tiny part of a regular bike is touching the road or ground surface. It's just two little parts of rubber under each tire, which is needed to provide good drip and traction. 

In contrast, a snowmobile has giant front skis that are far apart from each other. This gives snowmobile stability and a lower center of gravity, which helps prevent it from slipping and sliding.

Snowmobile Parts

Now we know a bit more about why snowmobiles and Munster snowmobile products are so effective in the snow, let's look at some of the crucial Munster snowmobile parts and things that may need snowmobile repairs.

Snowmobile Engines

Let's talk first about snowmobile engines. The engine is the heart of your machine, after all. So it's imperative to understand as much about it’s functioning as possible. 

Snowmobile engines come in two styles: two-stroke and four-stroke. Regular maintenance and repair of snowmobile engines are critical and should be done by a qualified mechanic.


The handlebars are the rider's primary connection to the snowmobile. They provide stability and allow you to steer the vehicle.


The windshield is essential in snowmobiles. It protects the rider from oncoming debris, wind, snow, and ice. It also makes the front of the machine more aerodynamic.


Headlights are another critical element to ensure you're visible to other snowmobilers around you. This is especially true since snowmobiling often occurs in remote areas with low light. You also must illuminate the path ahead of you, even during the day when snow compromises your vision.


The throttle powers the driveshaft and then the rubber track. The rubber track ensures you're moving swiftly through the ice or snow. The throttle feeds fuel to the engine when the driver squeezes the throttle lever on the handlebars.

Snowmobile skis:

The ski blades or skags guide the snowmobile along the snow, gliding on the surface and pivoting to steer the vehicle. They usually have stabilizers running along them to reduce slipping.

Read more →

Best Tips to Purchase Polaris Snowmobile Parts and Accessories

Posted by Power Funnels Marketing Team on

During your wintertime, Polaris snowmobile parts and accessories offer some of the most exciting experiences. Shredding through the powder quickly, you can satisfy your need for speed and make memories that'll last a lifetime. However, stock-model snowmobile accessories are only equipped for so much, and you must provide them with additional tools if you want to head out for longer, more rigorous trips.

These are some of the most critical Polaris snowmobile accessories, and how can help you preserve your ride, improve its overall performance, and even protect you in a jam.

Adapter Kit:

When you first purchase, you must consider fitting a sturdy adapter kit to the Polaris snowmobile's rear saddle region. These parts create sturdy clasping locations to attach various Polaris snowmobile parts and accessories and screw directly into the platform. This conversion kit immediately offers an infinite number of combinations and carry-on options, whether it is a couple of extra saddlebags for storage or an extra seat for a passenger. Therefore, this adapter device is a perfect place to start if you need to bring various things with you on an extended vacation. 

Front and Rear Storage Bags:

Likewise, you should consider getting a couple of extra storage containers. Numerous aftermarket Polaris snowmobile parts and accessories are available, giving you plenty of room to keep goods while riding. The rear saddle bags provide the most prominent surface area, making them ideal for storing tools or personal necessities. Additionally, you may get a front windscreen bag to keep items like your phone, snacks, and water that you require more frequently. Even though Polaris snowmobile parts and accessories already have designated storage areas, these extras guarantee you'll always have room.

Fuel Storage Tank:

For those longer outdoor journeys, you should also purchase an attachable fuel tank, similar to storage bags. Since you can run out of petrol at any time, having a spare tank on hand can help you stay ready to move forward at all times. These tanks are more compact and have a unique form, taking up less space on the back of your snowmobile. Because of this, they are much simpler to hold onto than standard jerry cans.

Extra Seat Attachment:

As previously noted, installing a sturdy adapter kit makes it simple to outfit your vehicle with various additional Polaris snowmobile parts and accessories, the most important of which is an extra seat. These parts connect directly to the adapter kit and maintain a secure hold during the ride since they are made from the same cold- and snag-resistant materials as the regular Polaris seat. No one is left out when there is fun to be had with this accessory.

GPS Navigation Device:

Another good aftermarket addition to your Polaris snowmobile parts and accessories model is a GPS unit. It's still relatively simple to become lost in the vast, snow-covered countryside, regardless of how often you've driven your snowmobile through the same area. You run a severe danger of becoming lost; as a result, therefore having a tool that can direct you is essential. Although you would first want to use your phone for this, these gadgets have considerably better battery life and can retain a GPS signal much longer.

Hand and Grip Protectors:

Make sure you consider installing hand protectors along your snowmobile's grips. From small rocks to sticks, it's hard to tell what debris sits just below the surface of the thick powder. If they kick up and hit your hands, you could get a severe injury that keeps you off your machine for weeks. Fortunately, thousands of quality hand guards are compatible with Polaris snowmobile parts and accessories for you to look at.

Tall Windshield Attachment:

A taller windshield attachment can help you with avoiding injury too. It is made from thick polycarbonate; these products block larger quantities of wind during a ride and impact from flying debris.

As such, you will remain perfectly comfortable temperature-wise and never need to worry about the potential for injury when driving fast. Best of all, these components fit perfectly over your existing Polaris model windshield, taking the hassle out of installing them.

Power Vision Tuner:

Munster Canada's power vision tuner component is one of the essential Polaris snowmobile accessories. If you want additional speed and control from your snowmobile, this is the product for you. Its single-connector design makes installation a snap and allows you to tap into greater horsepower with just a few taps of a button. With this product, you can maintain complete management of your ride's ECU- and fine-tune your experience while you're at it.

At Munster Canada, we are committed to providing speed demons like yourself with anything they could ever need to maximize the performance output of their machines. So, naturally, this also includes components for Polaris snowmobile parts and accessories. Our selection of Polaris snowmobile parts and accessories can help drastically improve your control over the output of your engine, enhancing speed and handling when you need it most. 

Read more →

Snowmobile Grab Bar: How To Choose The Best One

Posted by Power Funnels Marketing Team on

Do you know having complete control of your snowmobile while riding is significant and makes riding much more pleasurable? Changing the right snowmobile grab bar could make a big difference in the sense of your snowmobile grab bars and the quantum of control you have over your snowmobile.

Changing your snowmobile grab bar generally happens for one of three reasons you're changing your handlebar setup and need new snowmobile handle grips.

The alternative being your current snowmobile grab bar is worn out, and now you need new ones. The final reason is that you want to change the style or look of your snowmobile grab bars. 

Regarding modifying your snowmobile, perfecting the grab bar is cheap and beneficial. It's one of the most accessible effects you can do to alleviate your riding experience.

 This composition will help you grasp the stylish snowmobile grab bar and explain why we chose them.

 Cheetah Factory Racing- Snowmobile Grab Bar:

Taking the top of the list is one of our particular favourites; the CFR snowmobile grab bar. This is an injection moulded handlebar grip made with a super tacky rubber giving you the most grips per sprinkle of bars. These grips are made with a fragile periphery rubber emulsion, allowing them to fit over your bar heating rudiments. The diamond pattern grip provides maximum comfort and gives the rider an optimum bar sense. 

These grips are 67/8 in length and fit all CFR's bars, utmost stock bars, and numerous aftermarket bars. They're long enough to fit over" j" hooks. The CFR snowmobile grab bar isn't recommended for the small periphery Ski-Doo bars; CFR makes a" hand Grip" that would be better for these bars.

 RSI- Snowmobile Bars Grips: 

Next on our list of the best snowmobile accessories is the RSI Racing Snowmobile Handlebar Grips. These grips come in 3 different lengths, which are 5 in, 7 clouts, and 8 in. grips are available in 11 different colors, one of which is indeed a swish curve of argentine, white, and black color scheme. If you're interested in the 5" or 8 in. snowmobile grab bar, your only color option is black as they're less generally chosen lengths.

Our grips at Munster Canada work on any RSI-fazed sword bar themes and other snowmobile bars with prebent pieces. They also work excellently on stock bars and bars with short pre-bent hooks. Suppose you're running bars with longer than regular hooks, the 7- inch. Grips won't work. You'll need the 8 in. grips or RSI's "Gel Grip Wrap." On the other hand, no pun is intended; if the grips are too long for your relish, cut them to the size you would like.

Still, these could be the snowmobile grab bar if you have small hands or enjoy a narrower sense of your bars.

 ROX Speed Fx- Snowmobile Handlebar Grips:

The Rox Speed FX Snowmobile Handlebars Grip is our third pick. However, you know these are the preferred grips of numerous pro-level brigades if you're apprehensive about the snocross world. That says a lot, as good grip and control are essential for snowmobile racing. Without it would be a form of disaster.

These grips are thin, durable, and black. They come in one length, which is precisely 67/8 elevation. They're made for 7/8 in bars with a regular thumb throttle. Outside of this, Rox Speed FX only tells you a little more. We cannot guarantee these grips will work together with your bar's heating rudiments. Still, we'd be amazed if they did not, as handlebar grips are pretty standard in design and function.

 ODI- Snowmobile Handlebar Grips: 

We also have the ODI Ruffian Snowmobile Handlebar Grips, a lower popular aftermarket grip. It still provides outstanding non-slip performance. They have an 8- inch length and a typical thumb throttle erected for a 7/ 8- inch bar. They come in six different tinges, the utmost of which are veritably pictorial.

 Installing these snowmobile handlebar grips is simple. Bring them on. Line or cement isn't necessary. These grips can be locked into position using the ODI Lock-on Grip System and many wrenches turns. Although we've yet to try this cinch-on grip technology, we're curious to do so.

Read more →
  • 1
  • 2
  • 3
  • 5